Linksys RE6300 setup - Linksys RE6300 router login

linksys re6300 setup
linksys re6300 setup

How to set up Linksys RE6300 extender in a local network?

Users performing the extender setup process for the first time recommended taking help from the Quick setup guide that comes along with the device. You can conveniently do the extender setup process either through a Wi-fi connection or through a WPS button of the range extender. To connect your router to an extender through a WPS connection, ensure that the router contains a WPS button. Once the setup process gets done, you can configure the range extender anytime using the extender.linksys.com interface.

Steps to setup a Linksys RE6300 extender in a local network

  1. Unbox your range extender and adjust its antennas upwards.
  2. The first step is to bring the range extender and router to the same room to perform the setup process
  3. Now, connect the range extender directly to an available power outlet.
  4. At first, the Power LED is going to blink yellow, wait until the LED blinks amber.
  5. Meanwhile, turn on the computer or laptop you are going to use for the configuration purpose.
  6. Open a browser and scan for the available Wi-fi networks nearby.
  7. Connect to the default Network name of the Netgear Wi-fi extender.
  8. You can find the default Wireless credentials on the back of your device.
  9. Once you are connected to the extender’s network, open a browser on your computer.
  10. Type extender.linksys.com or 192.168.0.254 on the address bar of the browser and hit enter.
  11. The configuration page of the extender setup appears on the screen.
  12. To start the setup process, click on the “Start Setup” button.
  13. If you want to change the default language, change it from the drop-down list on the bottom left corner. English is set as the default language.
  14. Click on the next option and it starts looking for the available Wi-fi network.
  15. The Wi-fi list appears on the screen. Select the router’s network to which you want to connect the range extender.
  16. Enter the network password on the provided field and click Next
  17. The extender.linksys.com interface starts the process of connecting to the network.
  18. Once the range extender gets connected to the router, personalize the extender’s network Wi-fi settings.
  19. Remove the default Network name and assign a new one in its respective field.
  20. Type the desired SSID name, Network password, and security level to the Extender’s network.
  21. If you have a dual-band extender, perform the former step in the 5GHz network too.
  22. Note: Users are advised to assign a different network name and the same Wi-fi password to the extender’s network.
  23. Hit the next tab and the next page will show whether your router is too close or far from the range extender.
  24. Click on the next option.
  25. Assign the extender login password in the admin password field. For security purposes, also type down the password hint in the provided field.
  26. Click on the Save button when you are done.
  27. On the next page, you can review all the settings of the Wireless and administrative ones.
  28. At last, click the Finish tab and the extender reboots to save all the settings you did.

Re.rockspace.local is not working?

Note: You can print down the summary page when the extender setup process gets done. You won’t have to face any hassle while interacting with the extender.linksys.com interface.