The Amped Wireless rec10 is one of the finest range extenders that is launched with a number of advanced features and qualities that have proved this range extender to be the best extender out of all others. This extender consists of dual 2.4GHz amplifiers easily removable antennas to increase the WiFi Covering area by 6,500 sq ft. It has a coverage of wide areas that makes your experience expectedly worthy. The feeling of using the laptop, computers, tablets anywhere without facing any issues like buffers will undoubtedly make your work and usage more interesting.

Once you are available with the extender your next step will be to set up the range extenders for enjoy the most worthy experience range extenders and finest connectivity and in order to process with the setup further you just need to follow the steps mentioned below:

• At the very first steps, you need to turn on the Amped wireless REC10 extender and plug it into the wall outlet of your location.
• At further you will see the range extender is instantly turned on and you will be able to find the WiFi name in the list as Amped_REC10 now click on connect.
• A pop up you will see to that will be asking you for setting up the range extender. You don’t need to proceed with the same just click on NO and connect.
• Now open any of the browsers like google chrome, firefox, etc.
• Type the URL amped.wireless.com or you can access the same with the default IP address i.e 192.168.1.240
• If you face any issues with the login then you can proceed with the access of Ethernet cable in order to connect with your System automatically with your range extender and then try once more.
• Now you will see the option to Scan, you need to click on the same so that you can observe the currently available networks, you will see the list appearing.
• Moving further you need to select any of the networks, just be assured that the signal strength should be more than 70%,
• If you are unable to find the network with this much signal strength than you are suggested to move your REC10 to any other location among your wireless router and WiFi dead zone.
• Here you need to type the security key for the current network.
• Type the network ID and Security Key for the Extended network. In order to create the same network, you can pick up the clone option in the settings.
• After these steps, you will be disconnected for 2-3 minutes to need to stay on hold as your extender will reboot automatically.
• Here you need to join the New extend network and further click the checkbox. This is to make it clear that you are successfully connected with the extended network in order to FINISH.

At last, you have successfully completed the setup of your Range extender and now you are free to access and enjoy the new and undoubtedly worthy network.

Be assured that the settings made have been saved successfully so that you don’t face any inconvenience while accessing the dashboard later on.

Troubleshooting for your range extender:

If you are unable to access the URL setup.ampedwireless.com:

• First of all, you need to check that your system should be connected to Range Extender’s Wi-Fi network: REC10
• You can also prefer the change your browser that you are using, as sometimes changing the current browser even helps you to rectify the issue.
• Instead of typing the URL as setup.ampedwireless.com you can also type the default IP address 192.168.1.240, as this will also take you to the destination of the login window.
• You can switch off( plug out the power adapter from the Range Extender )and switch on again.
• You can also take action for the factory reset to default settings, further you can also move towards this action.
• In some of the cases, it may happen that your range extender is not in the range, so in that case, you need to move your range extender to the near to the WiFi router and try the access again with the help of web menu.
• You need to take care of the signal strength as it should be more than 70% while scanning the results.
• Visit the Smart feature option in the web menu and use the WiFi coverage controls. You need to be very sure about the settings it should be at 100% and then access once again.