amped wireless ac2600 setup – Amped wireless setup is not that much of a hassle process to perform, as it only includes the manual connection and the internet configuration process. For new users, performing the wired process in these networking devices of Amped routers looks like a bit obligatory process but this hassle is also removed by the user’s guide of the setup.ampedwireless.com. Installation guide of the Amped routers is available on the web as well as in book form. The installation guide has not only made the setup of Amped router a hassle-free process but also a quick one, which plays a huge role in saving the efficient time of the users.

Steps to perform Amped Wireless setup in Amped routers

1. After performing the manual connection process, the user has to turn on his desktop and open up a browser in it.
2. Now, he has to type www.setup.ampedwireless.com on the address bar of the browser to interact with the Setup Wizard of the Amped routers. If the user is performing the setup for the first time, then the setup wizard of the amped router will automatically process on the desktop screen.
3. If you wish to manually perform the configuration of internet within the routers then skip the setup wizard else press the Next button highlighting at the bottom of the window.
4. The setup wizard will now begin the authentication method of identifying the type of Internet connection. Contact the online support team of Amped wireless if you encountering with any of the problems. If the internet identifying process becomes successful then you probably will see a tick mark highlighted with the green color.
5. Click on the Next tab to continue.
6. Now, assign a frequency band to your router.
7. The separate network name is assigned to each of the frequency band. If you wish to change the network name of both of the frequency band, you can change it. The user can also replace the default wireless password security key with the desired one.
8. When you are done with the configuring the wireless methods then click on the Next button to apply the settings.
9. The last and optional method is to create a new password for your router. You can also skip this method as it is not any compulsion for the user to replace the default password with the desired one.
10. Now, click on the Apply button to save the settings you applied.
11. The router will automatically perform the restart process and the dialogue box will appear on the screen notifying you about the completion of the setup process.

When the user entered www.setup.ampedwireless.com on the address bar and the web menu is opening up on the screen.

Here are some troubleshooting steps which will guide the user to eliminate the above issue

1. The most obvious troubleshooting method is to check that the router is properly connected to the Ethernet cable or not. Also, ensure that the router is fetching enough power from the power source with which you have connected your modem as well as your computer.
2. The user also must make sure that his computer should not be connected to any other Wi-Fi network. If it is connected to the other wireless network, then the user must disconnect it, restart the router and perform the connection process again.
3. Try using a different browser. Close the browser you are using and open up a different browser.
4. If you are using www.setup.ampedwireless.com on the address bar, then try using the IP address of the device to reach the web menu of the Amped routers.
5. It may be the case that the user has not completed the setup process through the Setup Wizard of the router. Complete the setup process with the setup wizard then when you again visit the web interface of the router, the menu dashboard of the router will probably appear on the screen.
6. If all the above process is not bringing out the result then the last and only option you are left with is to perform the reset process within the router. The process will remove not only remove all the data and settings but along with that bugs and threats from the device which might solve this issue.