How to Upgrade Firmware of your Amped Wireless High-Power Wireless-N 600mW Pro Access Point (AP600EX)?
The Amped Wireless-N 600mW Pro Access Point (AP600EX uses internet software (firmware) to operate and requires regular update to the newer versions for better performance and functionality. The firmware update requires signing into the Amped Wireless-N 600mW Pro Access Point (AP600EX) dashboard through setup.ampedwireless.com login as explained below:
To manually upgrade your Amped Wireless-N 600mW Pro Access Point (AP600EX) firmware:
- Download the latest firmware file for Amped Wireless-N 600mW Pro Access Point (AP600EX) from the Amped extender’s official website http://www.ampedwireless.com/support website and save it on your computer safely.
Note: The Firmware files are zipped files that end usually with a .bin file extension and require to be unzipped for uploading during the Amped Wireless-N 600mW Pro Access Point (AP600EX) firmware update process.
- Launch a web browser on your computer connected to the wireless network of Amped Wireless-N 600mW Pro Access Point (AP600EX) through wired cable connection using Ethernet cable or wirelessly over Wi-Fi using the default wireless network settings of the Amped Wireless-N 600mW Pro Access Point (AP600EX)
Note: The wired cable connections are recommended for firmware update to avoid any signal loss or signal interference.
- To access the Amped Wireless-N 600mW Pro Access Point (AP600EX) the settings menu, perform Amped wireless login by typing setup.ampedwireless.com in the address bar of the web browser and logging into the Amped Wireless-N 600mW Pro Access Point (AP600EX) web menu.
- If the web menu of the Amped Wireless-N 600mW Pro Access Point (AP600EX) fails to open via setup.ampedwireless.com, try using the default login IP address http://192.168.1.240 for amped wireless default login which will redirect you to the web menu page.
- You will be prompted to enter the default amped wireless router login details for Amped Wireless-N 600mW Pro Access Point (AP600EX) login via setup.ampedwireless.com.
- Enter the default Amped Wireless-N 600mW Pro Access Point (AP600EX) login username as ‘admin as well as default login password as ‘admin’ in the dialog box that pops up.
- You will reach the settings page or dashboard of the Wireless-N 600mW Pro Access Point (AP600EX).
- Click on More Settings option on the Wireless-N 600mW Pro Access Point (AP600EX) dashboard’s left panel.
- Click on Management option on the dashboard and select the Upgrade Firmware option.
- On the firmware upgrade page, Click on Choose File or Browse option for Amped Wireless-N 600mW Pro Access Point (AP600EX) manual firmware upgrade process.
- Click on Browse option to locate the saved firmware file.
- Click Upload to begin amped Wireless-N 600mW Pro Access Point (AP600EX) firmware update.
- Locate the downloaded zip file that you saved above on your computer and highlight it to open and upload it.
- Click on Upload tab to begin manual firmware upgrading of your Wireless-N 600mW Pro Access Point (AP600EX).
The Amped Wireless-N 600mW Pro Access Point (AP600EX) will reboot when the firmware upgrade process will complete indicating the successful firmware update and will reach the setup.ampedwireless.com login page. Try not to interrupt the reboot and allow the firmware process to complete.